How To Avoid A Burst Pipe
A burst pipe is a householder’s nightmare – as well as being inconvenient and running up your water bill if you have a water meter, water can cause a huge amount of damage to décor, furnishings and can even damage the structural integrity of your walls if left unchecked. Leaks in bathrooms can result in bulging or even collapsed ceilings, and if the water hits electrical equipment then it could result in an extremely dangerous system. Prevention is better than cure, and there are a few things you can do, so learn how to avoid a burst pipe before it is too late.
Advice on How to Avoid a Burst Pipe
- Make sure that you have had annual boiler servicing Newton. Central Heating systems boilers require a service to make sure they perform at their optimum level.
- Keep doors and windows closed in winter, to avoid chilly draughts reaching parts of your home that are not heated and so are more susceptible to freezing.
- Open the loft hatch occasionally to allow warm air to reach any pipes in the loft.
- If you are going away, leave the thermostat on low, or set the heating to turn on periodically so that a minimum temperature is maintained and not a cycle of freezing and thawing. Also, get a friend or neighbour to check your property periodically.
- Turn off all of your taps – make sure they are fully switched off before turning in on a cold night.
- Don’t neglect repairs – dripping taps should be fixed immediately by plumbers Newton, and make sure your outside tap has lagging on the pipes feeding it, or turn off the supply over the winter and switch it on so there is no water left in it.
- Check that any pipework in the loft space, outside, or in contact with an external wall is properly lagged to prevent it from freezing.
Comments are closed.